Showing posts with label snoot. Show all posts
Showing posts with label snoot. Show all posts

Tuesday, December 7, 2010

Grids versus Snoots

Another question that came up during the Experimental Portrait class was "what is the difference between using a grid vs using a snoot?" I commented during the class that the grids had softer edges while the snoot had a harder edge to the light.

Here are some examples using 10-, 20-, 30-, and 40-degree grids and a snoot.

 
click to enlarge
The first shot in the sequence is using a plain 7" reflector on a Speedotron Force 5 monolight. The next four in the sequence are the 10, 20, 30, and 40 degree grids. The sixth image is using a Speedotron snoot on a silver 7" reflector. The last image in the sequence uses the snoot on a black reflector. The black reflector is designated for use with snoots and is not a very common item.

In this next sequence I just moved the camera back a bit so that you can better see the edges of the light.

Click to enlarge
And a set of images of the grids and snoot pointed at a blank wall to better see their patterns:
Click to enlarge
In case you are not familiar with these items, here are photos of the reflectors, grids, and snoot...


The snoot is basically a black tube that goes in front of the flash head to narrow the light output. The grids have a honeycomb pattern of metal (usually aluminum) that narrows the light beam. On-axis a lot of light can go through, but as you move off-axis the light is attenuated.