Showing posts with label printing. Show all posts
Showing posts with label printing. Show all posts

Tuesday, November 15, 2011

Aspect Ratio


...or why can't I print a full frame image on standard paper sizes

Aspect Ratio is the ratio of the short size of an image to the long side of the image. We talk about it all the time without realizing it. When you get a 4x6 inch print you are describing the aspect ratio of that print: 4x6 (or 2x3, or 1x1.5). The length long side of the image is 1.5 times the length of the short size.

This happens to be the aspect ratio of most digital SLR cameras. These cameras evolved from 35mm film SLR cameras. 35mm film actually measures 24mm x 36mm (do the math, that translates to 2x3 or 1x1.5). Hence a 4x6 print can show the entire frame from a 35mm slide/negative or from most dSLR cameras. I say most because Olympus has SLR cameras with a 3:4 ratio, and most compact digital cameras are also in the 3:4 ratio. But that is not typical for dSLR cameras. I will talk about 3:4 ratio at the end of this post.

So, what happens when you want to make an enlargement from your dSLR image? If you make an 8x12 enlargement you will get the full frame. Everything you originally saw in the image. But, you might be saying, most frames are available in 5x7 or 8x10 sizes. What happens when I make a 5x7 or 8x10 print? What happens is that you either have to crop off parts of the original image, or you have to print with uneven borders (the borders on the long dimension will be wider than those on the short sides. The physical dimensions/aspect ratio of the image and the frame are not the same. Something has to go.

Here is an illustration:


The red line indicates the full 1x1.5 ratio of the dSLR original file. The other lines show the area of the image that will be included in various size prints.
The green lines shows the crop for an 8x10 or 16x20 (1x1.25 aspect ratio). Notice that a relatively large section of the original will be cropped out to make an 8x10 print.
The blue lines show the crop area ofor a 5x7 print (almost the full frame).
The yellow lines show the approximate crop area for an 8.5x11 or 11x14 print.

As mentioned above, there is an alternate way to print. You can have uneven borders, as shown here:


Here you are printing the full image frame (shown by the green lines) on 8x10 paper (red outline) at a size of about 6.67 inches by 10 inches, leaving a wide white border along the long dimensions of the print. I would never deliver a print that showed the uneven borders. I would have it mounted in a mat cut to the appropriate size and shape to display the full frame image and hide those white borders behind the mat.


Here (above) the red frame shows the full image as captured by the camera. The green frame shows the part of the image that can be printed as an 8x10 inch print. Of course that green frame can be moved left or right in the image for the best composition.

Another way to think about this is to divide the long dimension of your original image by the short dimension and then divide the long/short dimension of your frame size and see if they match up. For example, take your original image that is 2:3 ratio. Divide 2 into 3 and you get 1.5. Now take your frame size. First we will try an 8x12 frame. 12 divided by 8 equals 1.5. The number is the same. The original image will scale to 8x12 with no cropping necessary. Second we will try an 8x10 frame. 10 divided by 8 equals 1.25. This does not match the original 1.5, so the image cannot be scaled to 8x10 without cropping.

One more illustration:


Note the black diagonal line from corner to corner of the image. That shows various crops within the image that will maintain the 1:1.5 aspect ratio. The green border and diagonal line indicate the available 8x10 (1:1.25) crops available from this image. Any rectangle who's corners fall on the diagonal green line can be a 8x10 crop from the image.

Here are the some common aspect ratios and print sizes:
Aspect RatioSample Print sizes (no cropping required)
1:1.52x3, 4x6, 8x12, 16x24, 20x30, 32x48
1:1.254x5, 8x10, 16x20, 24x 30, 32x50
1:1.311x14
1:1.45x7

Of course, you can use standard frame sizes and cut custom mats to allow your prints to have a slightly different aspect ratio than the frame. How much different they can be is a personal choice.

3:4 Ratio -- or the 4/3 systemTraditionally, televisions and personal computers have had screens with a 4:3 (width to height) aspect ratio. Computer screens have come in 640x480, 800x600, 1024x768, 1280x960, etc. As compact digital cameras were being developed the 4:3 ratio was adopted by most manufacturers. This way digital camera images fit the computer screens. But they don't fit traditional photographic printing paper sizes.

Here is a 4:3 aspect ratio image with 8x10 (green) and 5x7 (blue) crop guides on it.


The 4:3 aspect ratio translates to 1:33333 and gives you uncropped print sizes like 10.5x14, 9.6x12.8, 
9x12, 7.5x10, or 4.5x6. Not your typical print sizes. But these do work well for online, full-screen presentation.


This is a re-run of an article I originally posted on my web site about 4 years ago.

Friday, January 28, 2011

More about DPI and the web and printing

This is a followup to Tuesday's post about the relevance of the DPI setting in an image file. In the first part, we were dealing primarily with images on the web. There, the dpi in an image file doesn't matter. If the image is 72 dpi or 300 dpi, it is just going to display on the screen at its pixel dimensions. So if we have an image that is 1800 x 1200 pixels that is what you get on the screen.

Does that make the DPI irrelevant? No.

DPI comes into play when we take our images and place them into a page layout program, like Adobe InDesign. In the page layout program the file that is marked as 72 dpi will come in at a very large size (25" x 16.7") and will look pixelated. The file that is marked as 300 dpi will come in small (4" x 6") and be of a finer quality. Here is an illustration of how they would look when placed into a standard 8.5x11 landscape page in InDesign:

Here the 8.5x11 page is indicated by the red line. Both of the images on the page are the same size (1800x1200 pixels). But you see the large difference in how they look. The 300 dpi image (green outline around it) fits well within the 8.5x11 page, while the 72 dpi image is four times the size of the 8.5x11 page.

The sad part about all this is that many people will find the quality of the 72dpi image acceptable enough to print. That is why setting your image files to 72 dpi on its own is not enough to deter their being swiped from the web. They also need to downsampled to a smaller pixel dimension. For places like Facebook and Flickr I usually downsize to around 600 pixels on the long side, and also add in a watermark.

Even that is not really enough. Here is the same 8.5x11 page in InDesign, but this time the image files are 600x400 pixels (but still 72 and 300 dpi). Again, the red line shows the 8.5x11 page, the yellow line is around the 72 dpi version and the green line indicates th 300 dpi version:

As you can see, even here these 600 pixel wide images are still printable at an acceptable quality for many people. If you printed out of Photoshop without changing anything in the files you would see a similar situation. The 600 pixel wide image at 300 dpi will print at 2 inches wide, while the version marked as 72 dpi will print at 8.3 inches wide.

Based on the above, my personal advice on setting resolution is to set your DPI HIGHER rather than lower if you want to want to make it more difficult for your images to be "borrowed" and printed. If the person borrowing the image doesn't know what they are doing, the higher DPI image will print smaller (at better quality). The lower DPI image will print larger; probably at a quality good enough for the person using your image.

Of course, if the image is just being borrowed to be used on a web site there is little you can do to prevent that other than not share any of your images. If the image can appear on someone else's screen, they can take it. Best advice I can give here is to develop a recognizable style and a watermark (even though that can be cloned cropped out).

To reiterate again, the important numbers when distributing your files are the pixel dimensions, NOT the DPI setting. Keep the dimensions small for proofs, Facebook, Flickr, etc. And find out exactly what your clients need if they are going to be printing your images.


Tuesday, January 25, 2011

What do you do when someone asks for a 300 dpi file?

So you thought that file size was confusing... Wait until you get into a discussion about resolution.

Did you ever get a call or an email from a client asking for a 300 dpi image? What does that mean? Here's how it typically goes, "Hey John, we saw this great image on your web site. We'd like to use it in an article in our magazine. Can you send us a 300 dpi version of it?"

If it is early in the morning and the above question is followed by the typical, "oh, by the way, we have no budget, but we'll send you a copy of the magazine" I will probably just say, "sure," and send them a 300 dpi version that will be just what they asked for, but possibly nothing like what they wanted.

If I'm in a good mood and it looks like they may actually have a budget I will ask them for more information. First question might be what is the usage and the budget. But this isn't a business discussion here, so we'll jump to the technical question... "300 dpi at what print size?" is the big question that needs to be asked.

300 dpi on its own doesn't mean all that much. Here are some sample images. One of them is 300 dpi. Another is 72 dpi. And the other one is 1 dpi. Can you tell the difference?



I didn't think so (or at least not without looking at the filenames).

Basically we have three images that are 400 pixels wide by 400 pixels tall. On the web the resolution setting for them is meaningless. They display one pixel to one pixel. Where the difference comes in is in the printing. What would happen if I sent the 300 dpi version of the above image to the client? It would be just what they asked for (300 dpi), but nothing like they wanted. It would print at about 1.3x1.3 inches, not the full double-page spread that it should be printed at.

Anway, here is what happens if we bring the 72dpi and 300 dpi versions of the image into a page layout application like InDesign. The file tagged at 72 dpi comes in at around 5.5x5.5 inches at 72 dpi. The 300 dpi version comes in, as stated above, at 1.3x1.5 at 300 dpi--much smaller. Can you scale the 300 dpi version up to 5.5x6.5 inches? Sure thing! But then the resolution goes down to 72 dpi. Similarly, we can change the 72dpi version to 300 dpi. But then the print size shrinks. Both files have the same pixel count. The resolution number is telling the layout program how much space to stretch those pixels out over.

Another place this gets confusing is in the images coming straight out of a digital camera. For example, take a file from the Canon 5D mkII that is 5616x3744 pixels. What is the resolution?

The answer is 72 dpi. Or 100 dpi. Or 240 dpi. Or 300 dpi. Or whatever resolution you want it to be. The DPI by itself means nothing until we go to print.

That 5616x3744 pixel image will (approximately) be:
at 72 dpi = 78 x 52 inches
at 240 dpi = 23.4 x 15.5 inches
at 300 dpi = 18.75 x 12.55 inches
That's all from the same file with no changes to it.

Some camera files claim to be 72 dpi. Others claim to be 180 dpi. Others might claim some other resolution. This resolution number is not important. The actual pixel dimensions are the important numbers. You can change the resolution at any time without affecting the file size/quality. In Photoshop, go to Image > Image Size and UNCHECK the RESAMPLE box. Then you can type in whatever resolution you want. The document size will change, but the pixel dimensions will not. In Photoshop Lightroom you get to select the pixel dimensions and dpi when you export your image. While working on your image those numbers don't come into play.

So, when someone asks for a 300 dpi image you need to go back to them and ask them for more information. Is this for web or print? What will the printed size be? Then you can work backwards and come up with the pixel dimensions you need to provide.

TO BE CONTINUED

Model in the sample photos is Courtnee Fallon (Zita the Aerialist).

Thursday, February 14, 2008

Resolution does matter when you print

Here is a hint to go with the previous blog entry on Resolution.

The same three samples that were included in that post have been placed into a page layout program (Adobe InDesign) for printing. The two smaller ones were not resized after placing. The larger one was shrunk to about 2% of its original size because it came in so large.



The smaller of the three is the 300 dpi version. The medium size one is the 180 dpi version. The large background image is at 1 dpi (print size is 350 inches x 350 inches, that's why I had to scale it down so much to fit on the page). The 300 dpi version prints at 1.167x1.167 inches and the 180 dpi version prints at 1.94x1.94 inches. Of course, any of them can be scaled to print at the same size (and resolution) within the page layout program. All of the files have the exact same pixel dimensions and quality. But it is much easier to start out with the image having an appropriate dpi rating embedded in it so it doesn't come in at 300 inches wide.

But on screen (as in the previous entry) they are exactly the same.