Had a busy weekend here, culminating with a photo session for Caela and the Dangerous Flares. Here are images from the session, which had a number of wardrobe and background changes.
The lighting, however, remained pretty much the same. It consisted of 4 or 5 lights. The "main" light was a 60" umbrella to camera left, about even with the subjects. That was augmented by two strip lights from each side of the rear of the set for edge light. Front light was from a Paul Buff 86" silver PLM with a Speedotron head plus an Alien Bees ring light. I stood with the PLM behind me, about 14 feet from the subjects, and the ring light on the camera. Camera was a Canon 5D mkII with a 24-105 lens. Speedotron lighting, except for the ring light.
Here are more examples...
Rambling about photography and stuff...
Please note, you may run across some artistic nudity in some of my posts.
If this is not to your taste, please click away. Thanks!
Showing posts with label ringlight. Show all posts
Showing posts with label ringlight. Show all posts
Monday, February 21, 2011
Monday, January 19, 2009
Comparing monolight strobes
I admit it! I have a mixed variety of monolights. I've got a Speedotron Force 10, an Alien Bees Ring Light, and a few SP Systems Excalibur 3200 and 1600 units. I try to not mix them together on the same set to help maintain color fidelity. But I decided to test them all out to find out just how different the color temperature of each is and how consistent the color is when dialing down the power. (Am I the only person out there who wants less strobe power or lower ISO cameras? I would like to have a good ISO 50 or 25 available. Higher ISOs with less noise is OK, but I'm often going in and adding grain.)
Anway, this isn't a scientific test, but I think it will work for my needs. I set up a Greytag Macbeth Color Checker and a WhiBal card at about 5 feet from a light stand. Took a series of photos at full power, 1/2, 1/4 (or -1, -2), etc. with each head. 7" standard reflector on the Excalibur and Speedotron, the 10" ring reflector (no diffuser) on the Alien Bee. I then opened all the files in Adobe Camera Raw 5.2 and used the White Balance tool to read the WhiBal in each image and wrote down the color temp and tint that resulted.
Here are the results:
As you can see, they are all pretty consistent. The color of the light goes slightly bluer (requiring a little bit more yellow compensation in the Color Temperature scale) as the power is lowered. I believe that is to be expected.
I also metered all three heads in the same configuration at 5 feet at full / minimum power:
Excalibur: 22 / 8
Alien Bee Ring Light: 32 / 5.6
Speedotron Force 5: 32 / 5.6
I won't list the watt-second ratings, as I don't think that number matters much, especially when comparing different brands of strobe heads. Watt-seconds measures how much energy can be stored in the capacitor. It doesn't really tell us much about the efficiency of the system.
Bottom line, I'm happy with all of these products.
Anway, this isn't a scientific test, but I think it will work for my needs. I set up a Greytag Macbeth Color Checker and a WhiBal card at about 5 feet from a light stand. Took a series of photos at full power, 1/2, 1/4 (or -1, -2), etc. with each head. 7" standard reflector on the Excalibur and Speedotron, the 10" ring reflector (no diffuser) on the Alien Bee. I then opened all the files in Adobe Camera Raw 5.2 and used the White Balance tool to read the WhiBal in each image and wrote down the color temp and tint that resulted.
Here are the results:
Power Setting | ColorTemp Adjusted To | Tint Adjusted To |
SP Systems Excalibur 3200 | ||
| Full Power | 5150 | -4 |
| 1/2 Power | 5000 | -6 |
| 1/4 Power | 4900 | -8 |
| 1/8 Power | 4900 | -8 |
Alien Bees ABR800 Ring Light | ||
| Full Power | 5550 | -10 |
| 1/2 Power | 5500 | -12 |
| 1/4 Power | 5400 | -12 |
| 1/8 Power | 5350 | -15 |
| 1/16 Power | 5250 | -16 |
| 1/32 Power | 5200 | -19 |
Speedotron Force 5 | ||
| Full Power | 5350 | -8 |
| -1 | 5250 | -8 |
| -2 | 5250 | -7 |
| -3 | 5150 | -10 |
| -4 | 5100 | -12 |
| -5 | 5050 | -15 |
As you can see, they are all pretty consistent. The color of the light goes slightly bluer (requiring a little bit more yellow compensation in the Color Temperature scale) as the power is lowered. I believe that is to be expected.
I also metered all three heads in the same configuration at 5 feet at full / minimum power:
Excalibur: 22 / 8
Alien Bee Ring Light: 32 / 5.6
Speedotron Force 5: 32 / 5.6
I won't list the watt-second ratings, as I don't think that number matters much, especially when comparing different brands of strobe heads. Watt-seconds measures how much energy can be stored in the capacitor. It doesn't really tell us much about the efficiency of the system.
Bottom line, I'm happy with all of these products.
Labels:
alien bee,
color temperature,
cornicello,
excalibur,
flash,
force 10,
force 5,
photography,
ring light,
ringlight,
SP Studios,
speedotron,
strobe
Subscribe to:
Posts (Atom)









