Showing posts with label plm. Show all posts
Showing posts with label plm. Show all posts

Sunday, June 5, 2011

Head Shot Fun

I finished up last month getting to photograph a couple of wonderful actors, Heidi and Elke. Both very fun to work with and willing to let me experiment with some lighting solutions. For Heidi, I started out with a ring light flash, then moved to a beauty dish setup, and finished up with a combination of medium softbox and beauty dish. Those came out looking like this...

Alien Bees Ring Light 85mm lens
Beauty Dish 85mm lens
Softbox and Beauty Dish 135mm lens
The next day brought a session with Elke that you can see below. For these I used a 24x36" softbox for the portrait and first t-shirt image. Then moved to the Alien Bees 80" silver PLM for the processed image. And back to a softbox for the photo of Elke's new tattoo.

Softbox 135mm lens
Softbox 24-105mm lens
Alien Bees Silver PLM 24-105mm lens
Softbox 24-105mm lens

Call or email me if you are in need of new head shots!

All photos on this post taken with a Canon 5DmkII camera with a 85/1.8, 135L/2.0, or 24-105L/4 IS lens.

Monday, February 21, 2011

Caela and the Dangerous Flares

Had a busy weekend here, culminating with a photo session for Caela and the Dangerous Flares. Here are images from the session, which had a number of wardrobe and background changes.

The lighting, however, remained pretty much the same. It consisted of 4 or 5 lights. The "main" light was a 60" umbrella to camera left, about even with the subjects. That was augmented by two strip lights from each side of the rear of the set for edge light. Front light was from a Paul Buff 86" silver PLM with a Speedotron head plus an Alien Bees ring light. I stood with the PLM behind me, about 14 feet from the subjects, and the ring light on the camera. Camera was a Canon 5D mkII with a 24-105 lens. Speedotron lighting, except for the ring light.

Here are more examples...
 
 
 
 
 

Thursday, December 16, 2010

A few more...

I realized I didn't include any full-length images using the white diffuser on the PLM in the previous post. Here are some examples with the diffuser...

f/5.6, 1/6 second
f/6.3, full power
f/6.3, full power

More PLM photos

Nothing to compare this time, just some examples to look at. I took the PLM to my office today and we played around with it in a camera club meeting. These were taken with a Speedotron 805 pack and 102 head with the 84" PLM. These are all without the diffuser except for the last image. The camera was a Canon 5DmkII with the 70-200 f/4 L IS lens. The PLM is approximately 16 feet from the subjects, I am standing in front of the PLM. Background is white seamless, just a short distance behind the subjects.
This gives an idea of the size of the PLM
f/5.6, strobe power lowered down

f/13, full power (800ws)

f/13, full power

f/14, full power

Looking into the PLM, f/22, 0.3 seconds, lens zoomed during exposure
f/32, 0.5 seconds, lens zoomed   


f/5.6, with diffuser

Tuesday, December 14, 2010

More light comparisons

About a week ago I got an 84" silver PLM* from Paul Buff (Alien Bees/White Lighting). I haven't had a chance (or the room, this is a very large item) to really give it a good test, but this evening I had some time available to do a set of comparison images with the PLM and a few other light modifiers. The PLM is mounted to the light using the new speed ring assembly that I modified to fit my Speedotron flash heads.

I will start by saying that I really don't like using a mannequin for lighting demonstrations. The surface of the mannequin doesn't mimic skin, and the eyes have painted in catch lights. But it does allow me to have a "model" that doesn't move between images while I'm changing out the lights. So, when looking at the following examples, pay more attention to the edge of the shadow that the mannequin casts. See which lights will give you harder or softer shadows.

The mannequin in this series is 18" in front of the background. This is much closer than I would normally place a portrait subject. But for beauty or experimental work I might sometimes have the model right against the background. The light stand is 117" (9.7 feet, 2.3 meters) from the nose of the mannequin. The light is situated just over my left shoulder, almost straight on to the mannequin in all but the last image. The last image is with a ring light, so the camera is on axis with the light.

All but the last image were taken with a Speedotron 805 power pack at its lowest power setting for one lamp head (50 watt seconds) going to a 202 flash head. The last image was lit with an Alien Bees ring light at its lowest power setting. The light stand is in the exact same position, though it was lowered a few inches for the last image (ring light). The power pack was left at the same power level for all photos. The aperture was adjusted to get proper exposure (I took a series of bracketed shots and selected the best from each series). The aperture each image was taken at is shown in the examples below. This should give you an indication of the efficiency of each modifier.

The modifiers used were: Silver PLM, Silver PLM with diffuser, bare bulb (flash head pointed towards the subject), 7" silver reflector, 7" silver reflector with 20-degree grid, 7" black reflector with snoot, 22" Speedotron beauty dish, 42" Photoflex umbrella (white reflective with black backing), 60" Photek Softlighter II, 60" umbrella (the Softlighter without its diffuser), 24" square Interfit soft box (white interior and interior baffle), and Alien Bee ring light. Camera was a Canon 7D with the Canon 100mm f/2.0 lens. Camera to subject distance is about 9.5 feet.

There were no fill/bounce cards. Just the one light.

I converted to black and white so that the color of the mannequin and background and slight differences in the color from each modifier wouldn't affect perception of the shadows. I've also included a color version to give an idea of the difference in color between the various modifiers on the lamp head.

       
      Click to enlarge
 
Click to enlarge

I hope to soon get to do a set of examples of the PLM compared with other modifiers with a full length subject and more distance between the light and subject and between the subject and background. Just need to find the space to do it in...

ADDENDUM: Adding a photo of the PLM with the Speedotron head (this photo was taken before modifying the adapter plate, so it is attached like an umbrella). This is shown in a standard 8' ceiling room to give an idea of the size:
If there is a comparison you would like to see please let me know.

Thanks!

PS: I've had some questions about adapting the PLM to a Speedotron head. Here are a couple of snapshots of the modified Speedotron speedring:
The black part is the Speedotron speedring. The chrome part is the included Paul Buff/Alien Bees speedring connector, which has its own speedring. I removed the AB speedring and drilled holes in the Speedotron speedring to match the three legs from the AB adapter.

I also slightly bent the lip on the Speedotron speedring to match the angle of the legs from the Alien Bees speedring attachment.


Here it is attached to a 102 lamp head
Note that the three legs from the AB adapter clear the flash tube cover on the 102 head. I found that the larger flash tubes on the 202 and Force mono lights touch the legs. So I only use this set up with the Speedotron 102 heads.



* for those waiting for their backordered PLM, I ordered mine on June 13 (2010) and received it on December 2 (2010).