Showing posts with label ring light. Show all posts
Showing posts with label ring light. Show all posts

Sunday, August 14, 2011

Lighting Rosemary

My previous entry I showed the photos I made today with model Rosemary Timmons and makeup artist Kerrin Birchenough. In this post I'm going to talk about the lighting set ups for the session.


Above you can see some of the basic setup. There is a 7-foot Westcott Parabolic Umbrella with black cover overhead (you can see the end of the umbrella shaft and the handle from the strobe head at the top of the picture). There is also a Westcott strip bank overhead behind the model. She is sitting on an apple box and there is an oval shiny reflector in front of her to bounce back some light from the umbrella to open any shadows on the model's face. A Blow It Fan sits to camera right to provide some motion to some of the photos. On each side of the model were black Westcott reflectors to kill any bounce from the sides.

Here is a view that shows the head in the
umbrella and the strip box in the back
Some of the images added a
ring Light in front
This is the model's view
(sans photographer).
The ring light is not in position here, but
you can see the Westcott 7-foot umbrella

Another view from behind the camera. This one is
a little deceptive because it makes it look like
I actually use my tripod. You can see the gray
seamless background and the black velvet ready
to be hung in the background. The hand painted
gray muslin is on the right
The main light for the day was a Speedotron strobe set powering the heads in the umbrella and strip light. At some points during the session I unplugged the umbrella head and replaced it with another head with either a 10-degree grid or a snoot, as in the next four images.

Snoot with black reflector
Snoot, as above
snoot, as above
10-degree grid
For other images I turned off the head in the umbrella and used a ring light. For yet others, I mixed the ring light and the umbrella.

Looking through the ring light
The backgrounds for these images consisted of gray seamless paper, black velvet cloth, some remnants from the fabric store, and a hand-painted gray muslin (courtesy of my recent class with Rosanne Olson at Photographic Center Northwest).

None of today's work would have been possible with Rosemary and Kerrin. Here are some iPhone photos of the prep work...

Getting started with hair
Initial makeup application
Finalizing hair for the last images
One last iPhone photo of the set at the end of the day...


Please feel free to post questions or comments.

Thanks!

Monday, February 21, 2011

Caela and the Dangerous Flares

Had a busy weekend here, culminating with a photo session for Caela and the Dangerous Flares. Here are images from the session, which had a number of wardrobe and background changes.

The lighting, however, remained pretty much the same. It consisted of 4 or 5 lights. The "main" light was a 60" umbrella to camera left, about even with the subjects. That was augmented by two strip lights from each side of the rear of the set for edge light. Front light was from a Paul Buff 86" silver PLM with a Speedotron head plus an Alien Bees ring light. I stood with the PLM behind me, about 14 feet from the subjects, and the ring light on the camera. Camera was a Canon 5D mkII with a 24-105 lens. Speedotron lighting, except for the ring light.

Here are more examples...
 
 
 
 
 

Tuesday, December 14, 2010

More light comparisons

About a week ago I got an 84" silver PLM* from Paul Buff (Alien Bees/White Lighting). I haven't had a chance (or the room, this is a very large item) to really give it a good test, but this evening I had some time available to do a set of comparison images with the PLM and a few other light modifiers. The PLM is mounted to the light using the new speed ring assembly that I modified to fit my Speedotron flash heads.

I will start by saying that I really don't like using a mannequin for lighting demonstrations. The surface of the mannequin doesn't mimic skin, and the eyes have painted in catch lights. But it does allow me to have a "model" that doesn't move between images while I'm changing out the lights. So, when looking at the following examples, pay more attention to the edge of the shadow that the mannequin casts. See which lights will give you harder or softer shadows.

The mannequin in this series is 18" in front of the background. This is much closer than I would normally place a portrait subject. But for beauty or experimental work I might sometimes have the model right against the background. The light stand is 117" (9.7 feet, 2.3 meters) from the nose of the mannequin. The light is situated just over my left shoulder, almost straight on to the mannequin in all but the last image. The last image is with a ring light, so the camera is on axis with the light.

All but the last image were taken with a Speedotron 805 power pack at its lowest power setting for one lamp head (50 watt seconds) going to a 202 flash head. The last image was lit with an Alien Bees ring light at its lowest power setting. The light stand is in the exact same position, though it was lowered a few inches for the last image (ring light). The power pack was left at the same power level for all photos. The aperture was adjusted to get proper exposure (I took a series of bracketed shots and selected the best from each series). The aperture each image was taken at is shown in the examples below. This should give you an indication of the efficiency of each modifier.

The modifiers used were: Silver PLM, Silver PLM with diffuser, bare bulb (flash head pointed towards the subject), 7" silver reflector, 7" silver reflector with 20-degree grid, 7" black reflector with snoot, 22" Speedotron beauty dish, 42" Photoflex umbrella (white reflective with black backing), 60" Photek Softlighter II, 60" umbrella (the Softlighter without its diffuser), 24" square Interfit soft box (white interior and interior baffle), and Alien Bee ring light. Camera was a Canon 7D with the Canon 100mm f/2.0 lens. Camera to subject distance is about 9.5 feet.

There were no fill/bounce cards. Just the one light.

I converted to black and white so that the color of the mannequin and background and slight differences in the color from each modifier wouldn't affect perception of the shadows. I've also included a color version to give an idea of the difference in color between the various modifiers on the lamp head.

       
      Click to enlarge
 
Click to enlarge

I hope to soon get to do a set of examples of the PLM compared with other modifiers with a full length subject and more distance between the light and subject and between the subject and background. Just need to find the space to do it in...

ADDENDUM: Adding a photo of the PLM with the Speedotron head (this photo was taken before modifying the adapter plate, so it is attached like an umbrella). This is shown in a standard 8' ceiling room to give an idea of the size:
If there is a comparison you would like to see please let me know.

Thanks!

PS: I've had some questions about adapting the PLM to a Speedotron head. Here are a couple of snapshots of the modified Speedotron speedring:
The black part is the Speedotron speedring. The chrome part is the included Paul Buff/Alien Bees speedring connector, which has its own speedring. I removed the AB speedring and drilled holes in the Speedotron speedring to match the three legs from the AB adapter.

I also slightly bent the lip on the Speedotron speedring to match the angle of the legs from the Alien Bees speedring attachment.


Here it is attached to a 102 lamp head
Note that the three legs from the AB adapter clear the flash tube cover on the 102 head. I found that the larger flash tubes on the 202 and Force mono lights touch the legs. So I only use this set up with the Speedotron 102 heads.



* for those waiting for their backordered PLM, I ordered mine on June 13 (2010) and received it on December 2 (2010).

Wednesday, December 8, 2010

Thinking about Catch Lights

For me, eyes are the center piece of a great portrait. I want to see life in the eyes. I also want to see a catch light. The catch light is the highlight reflection of a light source on the outer surface of the subject's eyes. Pretty cut and dried.

But it can get interesting and contentious when we start talking about the shape of the catch light. And it can get religious when we talk about the number of catch lights. Let's take on the issue of shape first.

I've seen a number of articles saying that catch lights should be round. The roundness would mimic a reflection of the sun, which is round. I don't agree. I don't think that we really notice the sun reflection in the eyes of someone we are looking at. Instead, I think of catch lights as mimicking a window or a doorway. These are usually rectangular shapes. So I often prefer the look of a rectangular softbox catch light. Even outdoors, I think we are more likely to notice a large diffused sky as a highlight in the eye than we are to notice the sun. With a strong sun, the subject would usually be squinting, tearing, or looking off in a different direction.
rectangular catch light
Above is an eye with a rectangular catch light. Referring back to my comment about mimicking a door or window, I added some black tape across the face of my softbox to create these catch lights...

When using a beauty dish we do end up with round catch lights. But the catch light is large. Not a small point (as the sun would be).

Also note the size of the pupils in the examples here. For my taste, the one above is a bit too small. I much prefer the look of the pupil in the image below. I talked about this a couple of days ago in my post about using beauty dishes (see the FLASHLIGHT section).
Then, of course, there are ring lights. This is a self portrait lit with an Alien Bee ring light with the 56" moon unit. Not something to use all the time. But a nice change of pace to use once in a while.

What about the number of catch lights?
Most traditional photographers will say just one light showing in each eye. Again, this goes back to the sun. There is only one sun in the sky. So one main light that reflects in the eyes. Personally, I don't usually notice multiple catch lights in photographs I look at. I much prefer multiple catch lights to no catch light at all. I think I will just let others fight that battle. Paraphrasing my old friend Bruce Fraser, "that is one hill that isn't worth fighting or dieing over."

Bottom line? Make the eyes look good!

Monday, January 19, 2009

Comparing monolight strobes

I admit it! I have a mixed variety of monolights. I've got a Speedotron Force 10, an Alien Bees Ring Light, and a few SP Systems Excalibur 3200 and 1600 units. I try to not mix them together on the same set to help maintain color fidelity. But I decided to test them all out to find out just how different the color temperature of each is and how consistent the color is when dialing down the power. (Am I the only person out there who wants less strobe power or lower ISO cameras? I would like to have a good ISO 50 or 25 available. Higher ISOs with less noise is OK, but I'm often going in and adding grain.)

Anway, this isn't a scientific test, but I think it will work for my needs. I set up a Greytag Macbeth Color Checker and a WhiBal card at about 5 feet from a light stand. Took a series of photos at full power, 1/2, 1/4 (or -1, -2), etc. with each head. 7" standard reflector on the Excalibur and Speedotron, the 10" ring reflector (no diffuser) on the Alien Bee. I then opened all the files in Adobe Camera Raw 5.2 and used the White Balance tool to read the WhiBal in each image and wrote down the color temp and tint that resulted.

Here are the results:
Power Setting
ColorTemp Adjusted To
Tint Adjusted To
SP Systems Excalibur 3200
Full Power
5150
-4
1/2 Power
5000
-6
1/4 Power
4900
-8
1/8 Power
4900
-8



Alien Bees ABR800 Ring Light
Full Power
5550
-10
1/2 Power
5500
-12
1/4 Power
5400
-12
1/8 Power
5350
-15
1/16 Power
5250
-16
1/32 Power
5200
-19



Speedotron Force 5
Full Power
5350
-8
-1
5250
-8
-2
5250
-7
-3
5150
-10
-4
5100
-12
-5
5050
-15

As you can see, they are all pretty consistent. The color of the light goes slightly bluer (requiring a little bit more yellow compensation in the Color Temperature scale) as the power is lowered. I believe that is to be expected.

I also metered all three heads in the same configuration at 5 feet at full / minimum power:

Excalibur: 22 / 8
Alien Bee Ring Light: 32 / 5.6
Speedotron Force 5: 32 / 5.6

I won't list the watt-second ratings, as I don't think that number matters much, especially when comparing different brands of strobe heads. Watt-seconds measures how much energy can be stored in the capacitor. It doesn't really tell us much about the efficiency of the system.

Bottom line, I'm happy with all of these products.